Issues with a Credit Card Machine using a VG202

[Deancc3710_2]

Has anyone run into any issues with using CC machines with using SCCP on a VG202?

Setup: 2 CC Machines--> VG202 --> connecting to Call Manager 8.6 using DHCP.  Both of my CC machines work fine doing a normal CC transaction, but at the end of the day the client runs a batch report on the cc machine but the cc machine will time out after 1 min.  The Batch report usually takes about 3 to 4 mins to complete. 

[paolo bevilacqua]

Have you set network-clock correctly on teh PRI gateway ?

[lisacoody]

Can you elaborate on your response? I'm having a similar issue with a VG-224.

Thanks!

Lisa Coody

[lisacoody]

Thank you!

Adding "network-clock-select 1 T1 0/0/0" to the config resolved the issue. No more slips and credit card machine runs smoothly now.

I very much appreciate your assistance.

[paolo bevilacqua]

Thank you for the nice rating and good luck!