10-29-2001 06:05 AM - edited 03-12-2019 01:04 PM
Is there a low cost way to get 8 fxo connections into a small call manager network? Most of the routers/gateways only support 4 fxo connections. Is there a card/option I'm missing.
10-29-2001 06:58 AM
Least cost way I know of right now is 2 x VG200 w/4FXO each. Other option is VG200 w/PRI, but I'd figure you're shy of the break-even point cost-wise.
I had heard in my SE days that they were going to be releasing higher density FXO/FXS cards. Going from 2 per module to 4, so you could get the 8 per chassis. Don't know if that has gotten nuked by the late economic decisions Cisco has made...
10-29-2001 08:24 AM
Hi!
Actually you can do it now... Just get the ISDN version of the fxo boards.. Two ports per line.. They are a bit pricey still..
don
10-29-2001 09:14 PM
You need the IAD2400 16FXS/8FXO but according to Cisco it was available this December.
10-30-2001 06:03 AM
Heard a rumor about another card coming out 1st Qtr next year that might fill my needs. This is "ONLY" a rumor...
12 dsps, mix/match 4 fxo, 8fxs, or 8fxo, 4fxs.
RUMOR guys, only a RUMOR :->
10-31-2001 09:24 AM
No longer a rumour...
http://www.cisco.com/warp/customer/cc/pd/rt/2600/prodlit/highd_ds.htm
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide