Other Collaboration Subjects

I’m getting very distorted voice calls while using a VIC BRI voice port. I have tried several Images, gain controls and have even changed all hardware components, ie the 2621 –-- NM-2V –-- VIC BRI S/T TE. I have even used an FXS in the router with a ...

Have a VG200 w/ 4 fxs ports running 12.2.3. When the ports sit inactive for a while there is a 3-4 second delay in recieving dial tone on the first call placed after the period of inactivity. Its almost like the ports have to "wake up". Is there a...

Unity 2.4.6 on Exchange 5.5 SP3. All User IS are kept on another larger Exchange 5.5 SP3 machine. No other users report this problem:<br><br>User records name. Within 5 minutes name is gone (replaced with "Extension 3220"). Within another 5 minut...

Two issues:<br>Is it possible to not have the email messages be included in the "new messages/saved messages" tally at the greeting when logging into voicemail?<br><br>Second issue is that new emails are triggering the MWI lamp on the phones. Users ...

scenario 2 sites connected via frame-relay.Should i use 2 pvc's , one for data and one for voiceor would interleaving and fragmentation mean onlyone pvc is required.second question, is path optimisation h175/176 using qsig supported yet ?

We are using a VG200 in MGCP mode as a PSTN gateway.Our current IOS is 12.1.5XM4. We have been having problems with both echo on voice loudness on the PSTN. It seems to be random, as one call will be fine and the next call (using the same analog line...

hello , I have a situation where we need a traveling phone system . Our situation is unique . It would be based in a trailor and travel to other places . We would give the local phone company the info a few weeks in advance and verify Digital connect...

I have a Unity 3.0(2) That will not respond to any key presses made from an external call. It keeps asking for input.The complete setup is Unity 3.0(2) Callmanager 3.0(11) and TSP 1.0.0.39Any suggestions

Hi,We're building a VoIP network using CCM; however, after some deployment, we constantly unable to complete calls due to T303 or capability exchange timeout. Does anyone have any idea on why this is happening and how we can fix this?Thanks!

Ok - maybe I'm missing something completely...but after installing the Cisco TSP and configruing the Phone/Modem TSP settings to point to my call manager etc...In order to click-to-dial am I supposed to be able to go into my contacts in Outlook and c...

Can anyone recommend a scheduling package that will allow me to print detail reports on the amount of point to point, multipoint and audio conferences? We have 15 video rooms worldwide and would like to produce monthly reports on their usage, thank...

Does Cisco Gatekeeper w Proxy route signalling and RTP packets thru the proxy. So a gateway will see only the gatekeeper IP address, rather than all the endpoint ip addresses.After much searching and reading of Cisco web pages and docs, I still cann...

I am running a call center with CRA/ICD. Sometimes there are calls that get stuck in queue. I have not found yet what causes this problem and I have no way to get them out of the queue. This happens even when I have available agents.Does anyone kn...

When installing Unity it states use Win 2000 as the base. I have previously used the Spirian disk from a Call Manager install and this worked fine however buying a MCS 7835 does not include the Spirian CD.Am I breaking a license by doing this or shou...

I am installing ICD on a CCM cluster with the ICD app running on the publisher. I have my phones (3 total) registering to the publisher, but only one of those is able to login. The others receive errors like:--snip--98: Nov 01 09:16:15.354 CST %MIV...