10-06-2006 02:43 PM - edited 03-13-2019 03:15 PM
from reading the documentation i see that MPE recommends a gatekeeper in a H.323 enviorment. if i dont have a gatekeeper how do i configure without it? i thought H.323 was for video not phones. If it happens that the config is set up in call mgr what handles the various calls that will come into MPE? i am confussed. thanks for any help that comes my way
10-12-2006 08:24 AM
You will need a gatekeeper. Cannot configure without it,.
10-14-2006 01:00 PM
Are you asking about Meeting Place Express or full version one?
For Express (MPE) i have been using MPE w/o gatekeeper, or you can point GK address to CCM IP address...
As i remember
10-20-2006 11:44 AM
thanks, i dont have a gatekeeper and it was working fine, but i could not use an internal ip phone to dial into MPE. that is my current concern. thanks for your post
10-20-2006 08:54 AM
If it is Meeting Place Express you do NOT need a gatekeeper.
In the MPE Configuration pages use the Callmanager address as the H323 gateway address. The latest Admin and configuration guides are good.
I have it running now without a gatekeeper
10-25-2006 10:26 AM
i got my MPE working again, i made a configuration change which was sending the wrong signaling out to the telco. thanks for all your help
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide