05-22-2002 03:01 PM - edited 03-12-2019 06:56 PM
Can anybody help me ?
I have tried in vain to provide MOH to an external caller through a Cisco router configured as an h323 gateway.
MOH works fine for the IP Phones on the LAN.
Thanks for any replies,
Mike
05-23-2002 12:19 AM
mike
check in your device pool, where it says network moh source that that has a moh source selected
hope this helps
dave
05-23-2002 05:35 AM
Hi,
I think the Problem that you have is the codec.
The Default codec for MOH is G711 u-law. You can change your codec under the Dial-peer or you can select the up to 3 Codecs on the "IP Media Streaming Application".
And check the "Media Termination Required " box on the CallManager Gateway configuration.
Hope this Helps.
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide