About anderson-david

anderson-david · 02-28-2007

HelloWhich version of the ATA is needed for Australia the I1 or I2many thanksDave

anderson-david · 06-03-2004

could someone reccomend what IOS ver to run on a 1760 router with a WIC1-SHDSLv2 card installed as i am getting different suggestions from different providersmany thanksDave

anderson-david · 08-27-2003

hi,could someone help me please, i have set up IPMA for a manager and secretary but i am having the following problemsecretary logged into IPMA assistant console(no problem) but when someone calls the manager the managers phone rings and shows as rin...

anderson-david · 06-25-2003

we have a PIX515E with 6.2.2 the problem is that when we config the firewall to forward multicasts all is ok but if we power the pix off then on, even though the multicast commands are still in the config it will not fwd multicasts until commands are...

anderson-david · 04-24-2003

i have unity 3.1 with the exhange 5.5 running on the same box, when i built it i used an account for the exchnage and unity setup, i was then asked to change the exchange account for a new one. what i have done is change all the service to use the lo...

anderson-david · 01-02-2008

Hi,1. this will depend on how you want to configure your system ie if you have 4 digit extensions then it is easier to have the phone company forward 4 digits and as such have an easier config without the need for extra translation patterns etc2. No3...

anderson-david · 11-30-2007

Hi Arvind,I had this confirmed by Cisco that this doesn't work, the only way to get the Nokia phones working was with the ClientI hope this helpsDave

anderson-david · 11-30-2007

Hi Colin,All Call Manager licences use the MAC address of the Publisher, if you have done one of the licences using the MAC of a subscriber, then send the file in an email to licensing@cisco.com and tell them you have made a mistake and give them the...

Re: UNITY VM TO UM user licenses · 11-30-2007

Hi,you will need to order a VM to UM upgrade, this is a licence that converts the VM licences to UM licences and yes it is chargeable, here is an example of what you could possibly need,To change VM to UM you will need the following:UNITY-LIC-UPG-4.X...

Re: UNITY VM TO UM user licenses · 11-29-2007

Hi,you can do this 2 ways1. Upgrade your current VM licences to UM and then upgrade your system to version 52. Upgrade your system to version 5 and then upgrade your VM licences to UMEither way will work, I hope this helpsDave

Member Since	‎02-28-2002 02:47 AM
Date Last Visited	‎01-15-2020 12:05 AM
Posts	167
Total Helpful Votes Received	55

User Statistics

User Activity

ATA186

IOS Version

IPMA

lost multicast config

Changed service account

Re: Expected digits from phone company

Re: Nokia Intellisync 1.1

Re: Licensing a subscriber in a cucm 6.0(1) build

Re: UNITY VM TO UM user licenses

Re: UNITY VM TO UM user licenses