Not enough DSP resources available to configure pri-group on controller E1 0/0/0

[raffi.shaik]

Hi All,

i m getting below error can any one know the solution.

Please help.

dldsipgw(config-controller)#pri-group timeslots 1-16
% Not enough DSP resources available to configure pri-group on controller E1 0/0/0
% The remaining dsp resources are enough for 0 time slots.
% For current codec complexity, 1 extra 16 channel dsp(s) are required to create this voice port.
dldsipgw(config-controller)#

[Philip D'Ath]

Buy more DSP resource.

[ravi ahuja]

Hi raffi

Do you have PVDM on your gateway, if yes then this mean the capacity is low and shall be increased to accommodate the PRI you are trying to configure.

check sh inventory and check for the PVDM you have and accordingly you can get the new one.

Regards