Other Collaboration Subjects

Hi everyone, i made a trunkk between CUCM and VCS, calls from VCS registered endpoints are OK, calls from CUCM registered endpoints are not workingMX200 registered on VCS, EX60 registered on VCS, TANDBERG 1700 registered on VCS and DX80 registered on...

Hi All,We have implemented MRA solution for our customer, We had ask to procure the CA certificate from Third party CA certificate issuing vendor.We had shared CSR request generated from Expressway C and E application to generate SSL certificate, As ...

Hi All, i m getting below error can any one know the solution. Please help. dldsipgw(config-controller)#pri-group timeslots 1-16% Not enough DSP resources available to configure pri-group on controller E1 0/0/0% The remaining dsp resources are eno...

Hello all, I found out that for our internal Productivity Tools release the certificate is about to expire and cannot find the certificate anywhere in our CWMS local deployment. The certificate is attached to a series of .dll files in Program files/...

We are working to replace OPX lines we have to a local hospital. Currently we have 1 setup between the CUCM release 10 that is using a VG204. This setup is a VG204 at the remote site where we have a local LAN connection. It is plugged into an AVAYA I...

I'm working a prepaid calling card application. I just have a new T1 - PRI installed. In order to identify calls made from payphone, I need to receive extra 2 digits and add them to DNIS. This extra 2 digits is known as OLI, Origination Line Info.So ...

We have a CUCM setup for 3 locations using one cluster. Each location has receptionist phone number 0 for internal and XX60 to call from other location. When a receptionist from Location A call a phone in Location B the Caller ID shows as 0 which co...

Hello everyone, we're starting the beta test for the new Cisco Support Community site next week and we'd love your input. The test will run from August 7 - 11. For more details or to sign up, please see our latest blog post. <cross-posting to Cisco C...

Hi,  We're using Expressway configure for MRA. Everything work fine, we can access Jabber IM&P and also phones service with this solution.  But I have a question for QoS. The only setting we have in the C and the E is Diffserv dans put the desired ...

Have deployed Jabber MRA, works fine.  However on all iphones, regardless if end users are on wireless or 4G after about 8-12 hours they get disconnected and have to reopen the app for it to login.  I don't think the APP is crashing, it just shows "S...

Could someone please provide me a document regarding how to renew all the certifications on Voice gateways and CUCM as well

Hi everyone,  Understand that CE 8.* version MX, SX or DX endpoints has ability to utilize LDAP access but would anyone know if there is a way to have LDAP access for TC7.3.6 version endpoints?  Thanks.

Hi  I have HQ with CUCM / CUC . 11.5 . On branch i have 2901 router .  Requirement  I want SRSV feature . At branch i didn't install CME/ CUE yet. which version should i install and how to config SRSV feature . As far as my knowledge we have to conf...