01-12-2006 05:44 AM - edited 03-13-2019 11:48 AM
Hi,
I have a Polycom H323 phone
I add this phone as a H323 client in the Cisco Call Manager 4.1
The Cisco IP phone Registered to this call manager can call the h323 phone ,but the h323 phone is not able to call the Cisco IP phone(sccp).Once I enter the digits it waits for some time and then gives busy tone.
Any clue if this setup should work ?
Thanks in advance
chinmay
01-18-2006 07:39 AM
This can be a codec mismatch between the SCCP phone and the H.323 phone.
http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080094604.shtml
01-18-2006 02:32 PM
is the h.323 phone using a gatekeeper? Is it setup to go to the ccm when you dial? My guess is form the description that the phone is not sending an h.323 setup to the ccm. This should work. It is an h.323 phone, but it is very similiar to an h.323 gw. This should work for audio and video (if this is a video phone).
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide