02-12-2006 09:40 PM - edited 03-15-2019 04:04 AM
Is there any way to ring an incoming call on a group of phones simultaneously ?
Then whoever pick the phone can answer the call.
All these extensions should have its own extension numbers.
Solved! Go to Solution.
02-13-2006 05:53 AM
Hi Nalaka,
Like Gonz indicated Shared Lines are a good way to go and can be used in conjunction with Private Extensions. For Example:
7940 Phone
Line 1 = Private Extension #
Line 2 = Shared Line #
Please note that "Missed Calls" information for the Shared Line will be shown on all phones with the Shared Line appearance.
Hope this helps!
Rob
Please remember to rate all helpful posts...
02-12-2006 09:47 PM
Hi,
Yes you can use Shared Lines, or Line Groups using Broadcast Algorithm (CCM 4.X and above)
02-13-2006 12:54 AM
Hi,
Can I have shared line as the second line for multiple phones while each phone having its own extension ?
01-20-2021 02:50 PM
But do Shared lines also ring in Jabber? It's not working on our system. The personal lines ring on Jabber but the Shared lines (visible in the Jabber client) do not.
02-13-2006 05:53 AM
Hi Nalaka,
Like Gonz indicated Shared Lines are a good way to go and can be used in conjunction with Private Extensions. For Example:
7940 Phone
Line 1 = Private Extension #
Line 2 = Shared Line #
Please note that "Missed Calls" information for the Shared Line will be shown on all phones with the Shared Line appearance.
Hope this helps!
Rob
Please remember to rate all helpful posts...
05-09-2006 01:04 AM
Hi Rob,
I have nearly same request than Nalaka, except that I'd like to have a call placed to an external number on a H323 trunk at the same time the internal phone is ringing.
Could you give a clue on how to do that with a CCM4.x ?
Best regards,
Stephan
05-09-2006 05:00 AM
Hi Stephan,
If I understand your question correctly, you want to ring an IP phone and remote line at the same time?
That is a little tougher. The only way I know how to do this would be to use Cisco Unified Mobility Manager. Have a read;
Cisco Unified MobilityManager offers the following features:
Simultaneous desktop ringing-Incoming calls ring simultaneously on the user's IP desktop phone and mobile phone or phones (up to 4). As soon as the user answers one phone, the unanswered phones automatically stop ringing. The user can choose the preferred phone to answer each time a call comes in.
Cisco Unified CallManager Compatibility --- Cisco Unified CallManager 4.0(2a) and later
From this doc;
http://www.cisco.com/en/US/products/ps6567/products_data_sheet0900aecd80410f2d.html
Hope this helps!
Rob
Please remember to rate helpful posts.........
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide