some trunking questions..

[adamf]

here's what I want to do..

i have a t1 to remote1.. and a t1 to remote2..

serial 2 connects to a csu/dsu which connects to a phone system.. i want to use channels 1-12 on the first t1.. and 13-23 on the second.. i think this is what you'd call a t1 cross-connect to the phone system.. is this possible?

[dgoodwin]

First of all, 13-23 = 11 channels and 1-12 = 12 channels. You can only cross-connect an identical number of channels, but they can be on any channel number.

You didn't specify what platform you are using, so I will assume for the sake of discussion that you have a 2600/3600 platform. Yes, you can do this using a VWIC-2MFT-T1 card.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t3/dteadi3t.htm