I have a T1 CAS to a NEC PBX from a 2811/1MFT/H323 gateway.
When handsets on the NEC dial a CallManager 7960 extension the 7960 displays Unknown Caller and no number.
I didnt think T1 CAS did Calling Party Name, but I should get Calling Party Number right? Do I have something mis-configred? Or is the NEC not sending the number?
controller T1 0/0/0
framing esf
linecode b8zs
ds0-group 0 timeslots 1-24 type e&m-wink-start
!
voice-port 0/0/0:0
station-id name NEC-Phone
!
dial-peer voice 2000 voip
destination-pattern 26..
voice-class codec 1
voice-class h323 1
session target ipv4:10.168.46.10
no vad
!