09-09-2004 09:49 AM - edited 03-13-2019 06:17 AM
Hi,
I have recently implemented a dial plan consisting of around 60 pots outbound dial-peers. My problem is that if using an IP phone the call is never matched against the logest prefix match. It always drops into the less specific match of '.' period. When using a Cisco ATA there is not a problem or other devices are okay as well. But it appears a few originating devices are the same and drop into the period '.' dial-peer. Please see attached, there are q931 traces and there associated "show voice call history brief" to assertain the pid: that is matched. I have also given the configuration of the respective dial-peers, any help in this matter would be grately appreciated:
Kindest Regards
Darren Frowen
09-15-2004 12:50 PM
I guess the
destination-pattern.
dot should be mofified.
09-15-2004 02:49 PM
Murabi Hi,
You miss the point. Im using longer prefix matching on 60 other dil-peers and the particular device never matches on any of them only the default!
Regards
Darren
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide