cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
367
Views
0
Helpful
3
Replies

Transfer problem - one way audio

Armin Suljovic
Level 1
Level 1

I have a problem with transfering calls from PSTN to ITSP.

Situation is like this:

I have CCM 4.1, IPCC 3.5 and Cisco1760 GW. I have connection to one of ITSP-s which is working perfectly, but what I want to do is to transfer calls from PSTN to ITSP. After transfer there is only one-way audio, the called party cant hear anything.

I configured DSPFARM, command "h323-gateway voip bind srcaddr", voip rtp send-rcv. GW and CCM can contact ITSP router, so routing is OK. I would appriciate if someone can help me with this.

3 Replies 3

dgahm
Level 8
Level 8

Try setting the CCM gateway to use MTP. I have seen this fix similar problems.

Please rate helpful posts.

Thanks for response.

I alreasy done that, but it is not working. Basically, I have 2 GW in my CCM, one is my local Gw for PSTN calls and other one is ITSP router. I configured both GWs MTP required, Media resource group list . I put ACL on my VoIP intrface on GW , and after establishing connection, no packets are sent thru that interface. I think it should use that IP address as peer.

I solved the problem. I change some things in device pool. Thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: