05-15-2008 12:26 PM - edited 03-13-2019 05:15 PM
What happen if I enable, and then disable the LDAP Directory Integration?
Do I loose all the users?
I ask because will see how many users there maybe will bee inactive.
Solved! Go to Solution.
05-15-2008 05:54 PM
the new directory sync takes a copy of the directory into the server, so all the users will still be in the directory
you can find more here:
LDAP Directory Integration
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/6x/directry.html
HTH
javalenc
if this helps, please rate
05-15-2008 05:54 PM
the new directory sync takes a copy of the directory into the server, so all the users will still be in the directory
you can find more here:
LDAP Directory Integration
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/6x/directry.html
HTH
javalenc
if this helps, please rate
05-15-2008 11:41 PM
Thank you for you answer.
I have read the SRND but I was not sure about what happen with the inactive users after disabling the LDAP sync.
/Johnny
08-23-2009 10:20 AM
From your message, it appears that the users will stay in the UCM directory after a sync, no sync, but the documentation differs.
I just did a migration using DMA from 4.1.3 to 7.1.2. Brought over all users. Turned on Sync with AD, then turned it off. All users are gone. Not good. Any way to restore? We didn't do a backup before enabling the Sync.
Lessons learned?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide