VG 224 Transfer

[twissam]

Hi,

please note that my client have VG224 configured as MGCP gateway with CCM 4.13

currently analogue phones can transfer but in blind mode, could it be possible to do a consultative transfer.

in case yes, how to do it, i could not find any doc on the net.

if i need to change the mode from MGCP to SCCP, it would be no problem.

thanks

[Rob Huffman · Accepted solution]

Hi Wissam,

According to this VG224 doc, Consult Transfer is supported with SCCP. Have a look;

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_data_sheet09186a00801d87f6.html

Hope this helps!

Rob

[thilanjayathilake]

Hi

I have configured vg224 with the call manager with SCCP .but stil the call transfering is not working. when i press the flash (Hook flash ) it will not switch to transfering mode

[admin]

Probably you should set "Maximum Number of Calls" to the value more than 1.

[martin.plank]

Hi,

I've configured 7 VG224 for SCCP, Max. Calls on CUCM5.1.2 ist set to 2, but Call transfer doesn't work. On my VG224 i have SW 12.4

[admin]

The one more problem may be incorrect IOS.

In my network I use

vg224-i6k9s-mz.124-4.T2.bin or

vg224-i6k9s-mz.124-9.T.bin

[wcarvalh]

Hi guys,

I was having this problem and it was solved setting "Maximum Number of Calls"! Thank's for the tip!