Heat dissipation is required

[Ahmed Wasim]

Dears,

Could you advise with the heat dissipation of the following devices because it is not listed in their datasheets or specs:

FPR2130-FTD-HA-BUN (FPR2K-PWR-AC-400)

BE6M-M5-K9 (BE6K-PSU)

C9500-24Q-A (PWR-C4-950WAC-R)

UCSS-S3260 (UCSC-PSU1-1050W)

HXAF-SP-220M5-V (HX-PSU1-770W)

N9K-C93180-EX-B24C (NXA-PAC-650W-PE)

If any document is available with the heat dissipation of any of them, please kindly share it too.

[Jeswin S · Accepted solution]

Hi,

The unit for Heat dissipation is BTU/hr.

The conversion from watts to BTU/hr is 1W = 3.412 BTU/hr. So, for example, a server that consumes 100W produces approximately 341.2 BTU/hr of heat energy.

https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/white_paper_c11-680202.html

Some datasheets have BTU mentioned,

I was able to find below ,

C9500-24Q   - 2900 BTU/hr

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9500-series-switches/data_sheet-c78-738978.html

Rest of the items , conversion of 1W = 3.412 BTU/hr might be needed.

Hope this helps ,

Please rate helpful posts ,