cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2097
Views
0
Helpful
2
Replies

Nexus 7004 with N2K-B22HP-P FEX won't connect

netwerkbh
Beginner
Beginner

Hello

I'm trying to connect an HP Blade server with an N2K-B22HP-P to our Nexus 7004 but it stays in de download mode.

# sh fex

  FEX         FEX           FEX                       FEX

Number    Description      State            Model            Serial

------------------------------------------------------------------------

116        FEX0116        Image Download         N2K-B22HP-P   FOCxxxxxxxx

# sh fex detail

FEX: 116 Description: FEX0116   state: Image Download

  FEX version: 5.2(1)N1(1a) [Switch version: 6.1(4)]

  FEX Interim version: 5.2(1)N1(1a)

  Switch Interim version: 6.1(4)

  Module Sw Gen: 12594  [Switch Sw Gen: 21]

pinning-mode: static    Max-links: 1

  Fabric port for control traffic: Eth3/44

  Fabric interface state:

    Po116 - Interface Up. State: Active

    Eth3/44 - Interface Up. State: Active

  Fex Port        State  Fabric Port

Logs:

08/07/2013 18:04:24.424401: Requesting satellite to download image

08/07/2013 18:04:46.442690: Module register received

08/07/2013 18:04:46.443233: Registration response sent

08/07/2013 18:04:46.443516: Requesting satellite to download image

08/07/2013 18:05:10.475657: Module register received

08/07/2013 18:05:10.476109: Registration response sent

08/07/2013 18:05:10.476390: Requesting satellite to download image

08/07/2013 18:05:36.703639: Module register received

08/07/2013 18:05:36.704118: Registration response sent

08/07/2013 18:05:36.704434: Requesting satellite to download image

08/07/2013 18:06:04.741774: Module register received

08/07/2013 18:06:04.742505: Registration response sent

08/07/2013 18:06:04.742628: Requesting satellite to download image

1 Accepted Solution

Accepted Solutions

Steve Fuller
Engager
Engager

Hi Martin,

At this point in time the N2K-B22-HP FEX is not supported with the Nexus 7000 series switches as the parent switch. If you look at Table 2 in the Cisco Nexus B22 Blade Fabric Extender Data Sheet you'll see it only lists the following:

Cisco Nexus parent switch model or line card

  • Cisco Nexus 5010 or 5020 Switch for Cisco Nexus B22HP and B22F
  • Cisco Nexus 5548P Switch
  • Cisco Nexus 5548UP Switch
  • Cisco Nexus 5596UP Switch
  • Cisco Nexus 6001 Switch
  • Cisco Nexus 6004 Switch

Regards

View solution in original post

2 Replies 2

amey.dixit
Beginner
Beginner

Hi,

What procedural steps you done while an HP Blade server with an N2K-B22HP-P to Nexus 7004??

Sent from Cisco Technical Support iPhone App

Steve Fuller
Engager
Engager

Hi Martin,

At this point in time the N2K-B22-HP FEX is not supported with the Nexus 7000 series switches as the parent switch. If you look at Table 2 in the Cisco Nexus B22 Blade Fabric Extender Data Sheet you'll see it only lists the following:

Cisco Nexus parent switch model or line card

  • Cisco Nexus 5010 or 5020 Switch for Cisco Nexus B22HP and B22F
  • Cisco Nexus 5548P Switch
  • Cisco Nexus 5548UP Switch
  • Cisco Nexus 5596UP Switch
  • Cisco Nexus 6001 Switch
  • Cisco Nexus 6004 Switch

Regards

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers