10-02-2018 12:48 PM
Hi team ,
I have a problem to config a schedule job on nexus 9000 , I received the message below.
USDC1NX9000.1(config)# scheduler job name a
Error: invalid userid
My NXOS: version 7.0(3)I7(1) and Nexus9000 93180YC-EX chassis
Can anyone say me how to fix it or if this is a bug?
Thanks.
Solved! Go to Solution.
10-03-2018 09:32 AM
Look at the below document for reference :
Note Remote users must authenticate with their clear text password before creating and configuring jobs.
10-02-2018 01:36 PM
Hi !
Please, for the sake of saving steps, did you check if it is enabled?
show scheduler config
it should say somewhere:
feature scheduler
scheduler logfile size 16
end
then you can define the job as shown here based on device version: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_...
Regards,
Please, if considered, mark as Helpful or as an answer, totally grateful.
10-02-2018 01:47 PM
Make sure you have enabled the feature scheduler
CORESW2# show feature | in scheduler
scheduler 1 enabled
If not use below commands :
CORESW2(config)# feature scheduler
CORESW2(config)# scheduler ?
aaa-authentication Password for AAA authentication(of logged in user)
job Define a job
logfile Scheduler log file configuration
schedule Define a schedule
transport Configure transport related configuration
10-03-2018 07:02 AM
10-03-2018 09:32 AM
Look at the below document for reference :
Note Remote users must authenticate with their clear text password before creating and configuring jobs.
10-04-2018 08:16 AM
Yeppp, I have to log in with the user configured in scheduler aaa-authentication to configure a job.
Thanks!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide