06-25-2018 07:18 AM - last edited on 03-25-2019 01:31 PM by ciscomoderator
Hi Team,
I want to configure OTV between my 2 Data Centres . I was going through few documentations and I can see that in most of cases shown have point to point link between 2 Data centres. In my case I do not have a point to point link between my Data centre, however there is another centre is between 2 Data centres. Can i still configure OTV and how ??
07-03-2018 05:00 AM
It should be possible as per the following, the OTV functionality can be used for multiple sites
Manish
07-09-2018 12:46 PM
If using Unicast mode then what you have will work to deploy OTV assuming the following -
Routed Network between the Data Centre (Core)
Could be any kind of Unicast Routed Network
Also account for the additional 42byte OTV header which means that the interface MTU needs to be set accordingly
If using multicast mode, the above mentioned plus also need to ensure that multicast routing is set correctly. There are some quick reference guides available but its not one size fits all approach.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide