11-19-2004 01:46 PM - edited 03-02-2019 08:05 PM
What is the cross over cable for 1000baseT GBIC ? same as 100baseT? I have two 3550 -24 connected on the gbic slot via 1000base-t Gbic card. But interface not up. Crossover cable is ok on the 100base-t. Any media command needed under gbic interface for 1000baset? or cable is wrong?Assuming the gbic is no problem.Thanks
Solved! Go to Solution.
11-19-2004 02:10 PM
It is different
Normal CrossOver
1........3
2........6
3........1
4........4 Unused
5........5 Unused
6........2
7........7 Unused
8........8 Unused
Gigabit CrossOver
1........3
2........6
3........1
4........7
5........8
6........2
7........4
8........5
11-19-2004 02:10 PM
It is different
Normal CrossOver
1........3
2........6
3........1
4........4 Unused
5........5 Unused
6........2
7........7 Unused
8........8 Unused
Gigabit CrossOver
1........3
2........6
3........1
4........7
5........8
6........2
7........4
8........5
11-22-2004 01:30 PM
Great. I'll test it out.
11-23-2004 12:09 AM
My problem is the same that his(your) problem But my problem is in the 3548-XL-EN Router and the conection is to the workstation and the interface is down too. Then, What is the cable type for 1000baseT GBIC to connection a workstation?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide