Folks,
I am attempting to get a BayStack 820 to dial via ISDN into a 3745 with a PRI. The call answers and PPP seems to authenticate but I can't get IP across the circuit. A show caller user nnnn detail gets the following (note the NCP: closed BACP):
sho caller user so.richmond1 detail
User: so.richmond1, line Se2/0:7, service PPP
Connected for 00:32:59, Idle for 00:33:00
Timeouts: Limit Remaining Timer Type
- - -
PPP: LCP Open, multilink Open, PAP (<-)
LCP: -> peer, AuthProto, MagicNumber, MRRU, EndpointDisc
<- peer, MRU, MagicNumber, MRRU, EndpointDisc
NCP: Closed BACP
Dialer: Connected to <unknown phone number>, inbound
Type is ISDN, group Di1
IP: Local 172.31.4.17/30, remote 172.31.4.18
Bundle: Member of so.richmond1
Counts: 60 packets input, 1097 bytes, 0 no buffer
24 input errors, 3 CRC, 9 frame, 0 overrun
63 packets output, 971 bytes, 1 underruns
1 output errors, 0 collisions, 14 interface resets
User: so.richmond1, line Di1, service PPP
Connected for 00:33:00, Idle for 00:33:00
Timeouts: Limit Remaining Timer Type
02:00:00 01:26:59 Dialer idle
IP: Local 172.31.4.17/30, remote 172.31.4.18
Bundle: Bundle so.richmond1, 1 link
Counts: 171 packets input, 2374 bytes, 0 no buffer
0 input errors, 0 CRC, 0 frame, 0 overrun
171 packets output, 1866 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
when I do debug ppp negotiat I get the following(attached). The 3745 config is attached as well
Any help would be appreciated....
cheers
Greg
