03-30-2006 08:30 AM - edited 03-03-2019 02:34 AM
We are running 6509
WS-C6509-E Software, Version NmpSW: 8.4(5)
The continuously occurring error that is displayed is as follows
2006 Mar 30 16:17:46 GMT +00:00 %SYS-5-REDUNDANTCLOCK_FAIL: Redundant clock failed
2006 Mar 30 16:17:46 GMT +00:00 %SYS-5-REDUNDANTCLOCK_OK: Redundant clock recovered
2006 Mar 30 16:17:46 GMT +00:00 %SYS-5-REDUNDANTCLOCK_FAIL: Redundant clock failed
2006 Mar 30 16:17:49 GMT +00:00 %SYS-5-REDUNDANTCLOCK_OK: Redundant clock recovered
2006 Mar 30 16:17:50 GMT +00:00 %SYS-5-REDUNDANTCLOCK_FAIL: Redundant clock failed
I have run the show environment command
Which states all clocks as '.' or pass
I have not yet rebooted the chassis but I do wonder if it's a bug or the clock needs replacing. Any help would be great.
Solved! Go to Solution.
03-30-2006 08:46 AM
Hi,
In my experience, the only resolution to this is to replace the clocks. There is no bug that creates false alarms for the clock modules, so this is a failing module. Since it is the redundant module, it is not service affecting.
I'd recommend opening a TAC SR to get the clock module RMA'd
HTH,
Bobby
*Please rate helpful posts
03-30-2006 08:46 AM
Hi,
In my experience, the only resolution to this is to replace the clocks. There is no bug that creates false alarms for the clock modules, so this is a failing module. Since it is the redundant module, it is not service affecting.
I'd recommend opening a TAC SR to get the clock module RMA'd
HTH,
Bobby
*Please rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide