10-18-2002 01:23 PM - edited 03-02-2019 02:12 AM
We continue to get incorrect data from our 7206's when monitoring the HSSI port. Does anyone have the correct OID to get ifIn/OutOctets? That would be a good start to try and determine are we even looking at the correct value.
10-18-2002 01:45 PM
For interface speeds of less than 20Mbps using 32-bit counters like ifInOctets/ifOutOctets are ok, but for High Speed interfaces > 20Mbps, you need to use the 64-bit counters (ifHCInOctets etc). Did you try using any other snmp tool to compre the results?. Also can refer to http://www.cisco.com/warp/public/477/Gen_NMS/38.html
10-18-2002 01:47 PM
Let me verify the collection counter is correct and I will get back to you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide