09-13-2005 04:32 AM - edited 03-04-2019 03:00 AM
on a catyst 2924XL I can create an access-list but the command ip access-group seems not to be available under config-if commande mode , how to use this access list to limit client access on the ports
thanks
Solved! Go to Solution.
09-13-2005 05:11 AM
Hi,
2900/3500Xl's does not support ACL's.
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/2935wc12/ol256208.htm#wp702378
regards,
-amit singh
09-13-2005 05:11 AM
Hi,
2900/3500Xl's does not support ACL's.
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/2935wc12/ol256208.htm#wp702378
regards,
-amit singh
09-13-2005 05:25 AM
thanks
for securiing the ports, the only solution is the use of mac-address-table secure command to restrict client connexion port by port or are there other solution ?
09-13-2005 05:35 AM
Use can use other features like port-security, Protected ports.
Please see the link:
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35wc5/scg/swports.htm
regards,
-amit singh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide