Other Network Architecture Subjects

monitoring compression stats on 1721 routers

Hi folks,I haven't (yet!) managed to locate the oids that will tell me how the software compression is performing between two 1721's across an X.21 E1 line - any clues, please? I'm using mrtg btw.Regards,Andy.P.S. sry - wrong forum; have cross-posted...

Resolved! Port-channel bundled/unbundled

Is this bundled or not bundled, is what I'm trying to confirm.I get two conflicting messages about, if the port-channel bundle is working or not working. (There is traffic on two channels intended to bundled)Version 12.2Switch1Config on port 1/1 is e...

Resolved! access-list on catalyst 2924XL

on a catyst 2924XL I can create an access-list but the command ip access-group seems not to be available under config-if commande mode , how to use this access list to limit client access on the ports thanks

Span monitor port with 12.2(18)SXE

I believe I have found a bug with port mirroring on the 7613 using12.2(18)SXE. This previously worked properly in 12.2(18)SXD. Since thereare extensive changes from SXD to SXE, I would not be shocked. Here isthe problem;gp1#sho monitorSession 1------...

Cross modules (SUP1A) Etherchannel behavior

I know an ehterchannel group can be configured on two SUP1A. Here is I got two etherchannels, group 1 consists of 1/1 and 2/1. Group 2 consists of 1/2 and 2/2. With SUP1A running cross module etherchannel, would the behavior same as normal ethercha...

vlans, ip address

why do we sometimes need to apply an ip address to a vlan, is it for management or incase your doing intervlan routing ?

vpn connection

Hi all, would it be possible for me to make a vpn connection say between my home and my friends home if we are both on the internet, how would I set this up ?thanks a million

snmp intervlan stats

Hello..I was wondering if it is possible to read the traffic stats for a "virtual" vlan interface on an cisco 3350 switch.. We got a setup like this:interface Vlan52 ip address x.x.x.x.x 255.255.255.224 no ip redirects no ip unreachables no ip proxy...

router 4500 ios recovery help

I erased router 4500 ios and then the router in the rommon mode. all available commands:alias set and display aliases commandboot boot up an external processbreak set/show/clear the breakp...

catalyst 6500 stateful switchover feature question

Would someone please respond how stable is this feature as well as the SXD code? If you have upgraded from RPR+, please let me know your experience. We really like this feature and would like to upgrade. Any comment is appreciated.

6509 with 24 10/100/100 LX connectors

i have the 6509 switch with module 24 port singlemode fiber LC connectors.which type of patch cord should i use to connect these ports to an SC PAtch pannelis it LC-SC ???

Puzzling Problem with VLAN

I had setup

dhcp to vlan

Hi all, is it possible to set up dhcp on a firewall/router, someone has set up a dhcp on a firewall here that only gives out ip's to vlan 200, is that possible ?

VLAN Trunk Port Speed

Im setting up a test on VLAN and inter-VLAN routing where I use a 2950 and a 1751 router. I have set-up 2 VLAN's from the switch and have trunk one of the port. Using a CAT 5 patch lead, I connect it to the switch trunk port and to the router fasteth...