Bandwidth Question

[js358]

Hello:

Not very familiar with VLANS. I have an HP switch

cross connected to our main office and a sperate floor. At times, the port on this switch is near saturation, 90% utilization. Is there anything I can do as far as linking 2 ports (similiar to multilinking) to increase this connections bandwidth?

Thanks

[glen.grant]

Set up etherchannel so that you can run multiple links run your traffic across . If you have any way to check to see what traffic is running across the links you might want to, I assume this is at least a 100 meg link and it takes quite a bit to bury a 100 meg full duplex link . Etherchannel might be your answer if you have multiple links going to the same floor .