Re: Cat 4000 Error Message

dofaulkner · ‎10-01-2002

Hi All...

Any ideas as to what the following warning messages are indicating.

The mac address in the messages is for the sc0 interface address.

"%SYS-4-P2_WARN: 1/Traffic from permanent host 00:02:16:da:41:ff but seen on incorrect port 2/23"

"%SYS-4-P2_WARN: 1/Traffic from permanent host 00:02:16:da:41:ff but seen on incorrect port 2/3"

Prashanth Krishnappa · ‎10-01-2002

Can you paste the output of sh ver. Also what connects to ports 2/23 and 2/3?

dofaulkner · ‎10-01-2002

Sh ver below -- Connections to the ports are PC's running Widows 2000 and XP

"sh ver

WS-C4006 Software, Version NmpSW: 5.4(2)

NMP S/W compiled on Apr 7 2000, 17:05:03

GSP S/W compiled on Apr 07 2000, 15:17:58

System Bootstrap Version: 5.4(1)

Hardware Version: 1.2 Model: WS-C4006 Serial #: JAB042007UJ

Mod Port Model Serial # Versions

--- ---- ---------- -------------------- ---------------------------------

1 2 WS-X4013 JAB042007UJ Hw : 1.2

Gsp: 5.4(2.0)

Nmp: 5.4(2)

2 48 WS-X4148-RJ21 JAB042409P4 Hw : 1.0

3 48 WS-X4148-RJ21 JAB042604PQ Hw : 1.0

6 36 WS-X4232-RJ-XX JAB042008Q4 Hw : 1.6

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 65536K 31208K 34328K 16384K 9445K 6939K 480K 214K 266K

Prashanth Krishnappa · ‎10-02-2002

Try upgrading to 5.5(16) and if you still see issues, I suggest to open a TAC case. 5.5(16) is the latest General Deployment and fixes many bugs including the ones discussed in the following field notice

http://www.cisco.com/warp/public/770/fn14464.shtml

dofaulkner · ‎10-02-2002

Many thanks...

I'll upgrade the switch and then keep an "eye" on it.

milan.kulik · ‎10-03-2002

I'm receiving the same error messages on my Cat4000s running CatOS 7.2(1). The ports are always links to another Catalyst switches (either Cat4000 or Cat3500XL, Cat2900XL).

Regards,

Milan

pgcampbell · ‎10-04-2002

I have 3 Cat4ks, One is Sup-3, 2 are Sup-2s. The CatOS is 7.2(1) on the Sup-2's. I have Not seen this. Are any of you running VTP for your VLAN updates?

I have VTP configured. The Sup-3 box is the VTP server, the SUp-2's(and a single 3550) are VTP clients.

hth

milan.kulik · ‎10-06-2002

Yes. I'm running VTP. My Cat4000s are Sup-2 equipped.

But I've not noticed any relation between the error message and VTP....

I can see the error message just occassionaly about once a month.

Why are you asking about VTP?

Regards,

Milan