cat 5005: Can not load image via xmodem???

[bpaull]

After loading an image to the cat 5005 via "xmodem" an error message is generating indicating:

*** TLB (Load/Fetch) Exception ***

Access address = 0x2eec

PC = 0x80010604, Cause = 0x8, Status Reg = 0x3041d003

monitor: command "xmodem" aborted due to exception

Any clues or suggestions???

[Prashanth Krishnappa]

Try downloading fresh CAT OS and try different baud rate(lower than what you used before). If you have the time, try it at 9600. Also what Sup and what version do you have

Regards,

-Prashanth