Cat5000 Boot ROM

[rpalacio]

Hi,

If anyone can help me with regards to part number of the NMP boot ROM 5.1(2) and the MCP boot ROM 4.3(1). I need to upgrade the existing Boot ROM of our Cat5000 for the support on the old network of our client. Can somebody please help me on this issue?

Thnak you very much.

[spremkumar]

Hi

Hope this helps..

http://cisco.com/en/US/products/hw/switches/ps679/products_installation_and_configuration_guide09186a008007ecee.html

regds

[rpalacio]

Hi,

Thank you for your reply. I already saw this article on Cisco web site. What I need is the exact Part number of the Boot ROM.

Regards

[spremkumar · Accepted solution]

hi

you can make use of show version command and find out the current version of both nmp & mcp boot rom and plan accordingly for upgrading the same to the latest version ..

http://www.cisco.com/en/US/products/hw/switches/ps679/products_installation_and_configuration_guide09186a008007ecd1.html#wp5597

regds

[rpalacio]

Hi,

Thank you very much for the help. I found already the exact part number. The link that you send will be helpful for me too.

Thanks again.

Regards