Hello,
I have set up an 831 with static IP PPPOE with the firewall feature set and have a question about best practices.
I have reviewed many configs for this setup and see no pattern as to where and in what direction to apply the "ip inspect NAME DIRECTION" command.
Some of them have it on the E1 interface coming in and some have it on the Dialer interface going out. Is there a rule of thumb and does it involve having it in the "in" and "out" on different interfaces on the same router?
Any help would be greatly appreciated as my searches have turned up nothing.
Thanks and best regards,
Jason Goldberg
CIPT-SS, CCNP, CCNA, MCP, A+
Systems Engineer