Hi, was wondering if the Cisco 2950 was capable of acting as a dhcp server. If not and I have to use my 831 series router will this dhcp okay to pc's hanging of the switch.ps switch is attached to router.
Hi All,Anybody has any idea about this error message:"Download Complete!loadprog: error - too many ELF program segments"I get this message when I finish downloading the IOS file via Xmodem procedure on a Catalyst 6509 with Sup 1A with MSFC2 engine ru...
Hi, as a noob im running into difficuly setting my 2600 router up for traffic shapping. I have a router with the following configversion 11.3service timestamps debug uptimeservice timestamps log uptimeno service password-encryption!hostname Router!!m...
I configured a 2514 (2 * ethernet + 16M ram + 16M flash) with ip-plus 12.3.13, for use with 1 public ip address and a PAT config (many-to-one).Public has a /28 range of which i can use 1 address for PAT translation of a /24 private subnet.Now, this w...
Here is the topology:LAN1--router1-10/100-wireless-10/100-router2--LAN2Routers 1 & 2 both have ethernet ports connecting to ISDN modem for backup purpose. How do I config these routers to kickoff the ISDN link when wireless is out of service ? Thanks...
I seem to be having trouble getting internet when I use the Cisco 1721 Router. What I am trying to do is connect my cable modem to the router's WIC ENET card and then connecting the router's fastethernet port to a switch. I have the E0 (cable modem) ...
In many discussions on QoS, it is stated that queuing only takes place when there is congestion. What defines congestion? A packet in the hardware queue? The hardware queue being full? Some minimum number of packets in buffers? Bandwidth treshold lim...
Hi wise experts,We would like to implement a design depicted in the "Diagram A - Connectivity View". We will configure the STP cost for each switch in such a way that the traffic will flow according to "Diagram B - STP View". This is to ensure that a...
I have a cisco 2950 switch and i wanted to configure port mirror on one port fastethernet 0/2 to montior the network traffic. I went through the cisco document and it referred to a command Port mirror <interface>/VLAN and tells to configure on the fa...
Hi AllI've got a 3550-48 EMI switch (running IOS 12.1(20)EA2) that is running at 100% CPU utilization. The VUR_MGR is running at 98% - which is crazy!I have already upgraded all the 3550s on our network to version 12.2(25)SE - which is the latest ver...
How do you configure a management vlan on a 6500 running native IOS? For example, I create a loopback with an IP but when I do a show cdp it shows the IP address of the lowest configured vlan. Is there a way to force the switch to advertise it's loop...
I have configured 3 vlans (vlan1, vlan2, and vlan3) on 2950 switch and also 3 vlans (vlan1, vlan2 and vlan3) on EtherSwitch Network module on 2600 router. The interface fe0/0 and fe0/1 on Cisco 2600 are already being used for other purpose. How do I ...
hi,I have a lab network which I test pre-production designs on.Im generating 100MB of traffic(web,ftp,smtp,snmp) across a MSTP region of 4 Cisco 3550-12G which two internet facing routers interconnect.pinging between each router GigE interface I get ...
Is there a router statement that I can direct our internet carrier to our back up carrier when the primary goes down? Will one router do the job or this has to be done with 2 routers? We have 2 routers right now and it's pointing to the 2nd router if...
