Cisco EnergyWise time-range...

[Ivan Levadnyi]

Good day, dear colleagues.

I need configure my PoE switches power OFF port at next time-range

At weekdays, power off at 20:00 power on at 8:00.

At weekend - power off all days.

I have next configuration port, example:

energywise level 10 recurrence importance 20 at 0 8 * * *
energywise level 0 recurrence importance 20 at 0 20 * * *
energywise level 0 recurrence importance 20 time-range weekend
energywise importance 20
energywise keywords IPphone+PC,All

time-range weekend
 periodic weekend 0:00 to 23:59

But it's doesn't work.

Need any suggestion.

Th's.

[Leo Laohoo]

I am not at the office right now where my working EnergyWise configuration. 

I believe you have one too many EnergyWise configuration.  I also believe your time-range is incorrect.  The way the developers code the EnergyWise time range simply defies logic.  

You need to create TWO time-ranges.  One to specifically say when to turn OFF and another when to turn ON.  (Why can't you just use one and use logic for the opposite, I don't know.  Defies logic.)

I'll post my EnergyWise configuration when I get back to work in 24 hours.  

[Leo Laohoo · Accepted solution]

energywise domain [HAKUNA MATATA] security shared-secret [PASSWORD]
energywise importance 60

!  Interface
interface range 
 energywise level 10 recurrence importance 70 time-range POWER_ON
 energywise level  0 recurrence importance 70 time-range TURN_OFF
 energywise importance 60

!  Time Range Power ON
time-range POWER_ON
 absolute start 00:00 01 January 2014
   periodic weekdays 8:00 to 20:00

!  Time Range Power OFF
time-range TURN_OFF
 absolute start 00:00 01 January 2014
   periodic weekdays 20:00 to 23:59
   periodic weekdays  0:00 to  8:00

With the config above, this means that power is OFF during the weekends.  

[Ivan Levadnyi]

[HAKUNA MATATA] :D Leo Laohoo, th's for your answer. But I need power off at weekend too. Correct my configuration if I'm not right: -------------------------------------------------------------------------------- time-range power_on absolute start 00:00 01 january 2014 end 00:00 01 january 2024 periodic weekdays 08:00 to 20:00 -------------------------------------------------------------------------------- time-range power_off absolute start 00:00 01 january 2014 end 00:00 01 january 2024 periodic weekdays 20:00 to 23:59 periodic weekdays 0:00 to 8:00 periodic weekend 0:00 to 23:59 -------------------------------------------------------------------------------- Th's for help)

[Leo Laohoo]

Try my configuration.  Weekends are powered OFF.

[Ivan Levadnyi]

I'll check, your configuration. Thank you.