Hello, I would like know if RV180 router support the link aggregation (802.3ad) i want to use this functionality with my DS214+ Synology NAS server (2x 1Gb eth) many thxregards
Hello, I would like know if RV180 router support the link aggregation (802.3ad) i want to use this functionality with my DS214+ Synology NAS server (2x 1Gb eth) many thxregards
Hi everybodyI have a IPSEC Site to site VPN between our HQ and our second office. The traffic of the VPN tunnel includes VOIP and data (mainly connection to terminal services). Furthermore the same internet line (in our second office) is used for int...
I am installing 2960-24ts-L and 2960-24ps-L switches, but before i do this i need to find out the inrush current for both of these devices and couldn't find that information on the data sheet, can someone tell me where i can get this information plea...
Hi everybody,I have a little problem understanding this article: http://www.cisco.com/c/en/us/support/docs/routers/10000-series-routers/50421-config-register-use.htmlIf I want, the Router, to boot the IOS from for example tftp://192.168.0.1/NAME.xyz...
Saludos compañeros, en un router 1921 cuento con un módulo HWIC de 4 int, las cuales cuentan con subnets diferentes para alimentar diferentes bodegas, el puntos es que a estas subnets necesito configurarles una ancho de banda distinto, en la Wan teng...
I have been searching on Cisco.com and Google.com for answers to this question. We will possibly be integrating our existing all Cisco based network with a network that has all Nortel. This company is running OSPF. Currently we are running EIGRP and ...
Hi, i am troubleshooting our ESA by using netstat, but when i run netstat all the events are running, is there a way to limit only or view only the listening ports? Note: on the manual when running a netstat an option appears, but when i enter n...
Hi,I am trying to come up with a solution for one of our customers who has CE routers with one WAN link and seperate Voice network. The customer wants to integrate their Voice traffic int the MPLS network via the existing CE router with one WAN link....
I need to setup a NIC team, using LACP on a Dell Server. I have two switches, up-linked together (not stacked). Is it possible to create a LACP group, two ports, one port from each switch?
Hi Please help me on this:How to configure QoS for Video Conferencing . which parameters I should follow for this.Installed VC Device like this VC Device àCore Switch [Native VLAN]àFirewall [5505 ASA]àCisco Router[2900]àISPNAT=192.168.X.X to 125.X....
I have an ASA 5510 firewall that when it boots it says that the boot image is missing. This firewall was giving to me just recently so I don’t have a previous backup. The person who gave it to me doesn’t even know what a firewall is. This firewall wi...
Hi Guys, I would like to ask if you have encountered this kind of problem. I have a WS-C3750-48P, all ports were supplying power to ip phones then suddenly only 15 ports can generate POE. Please see details below. show power inline | exclude offModu...
In 802.3 Ethernet protocol....if MAC address is not assigned to a Ethernet controller (i.e. 00:00:00:00:00:00) is it allowed to receive broadcast frames (FF:FF:FF:FF:FF:FF)?I mean ARP Request frames from other nodes in the network.~ Sandeep
Hi Which part of the OSS does Cisco Prime Network provide? and what about Cisco Prime Provisioning? Is there any mapping table Between eTom building block and these Solutions?Please advice.
I have read the release notes for the various S/W versions that can run on this card and I have checked the Installation and Configuration note for this card. Yet I cannot fine the procedure to upgrade the S/W on the WS-X5410 card. What is the proced...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-07-2024 06:15 AM | ||
07-17-2024 11:08 AM | ||
05-29-2024 04:52 AM | ||
02-14-2024 04:00 AM | ||
11-10-2023 09:28 AM |