03-06-2013 09:20 PM - edited 03-03-2019 06:59 AM
Dear team
I have requred new 12 port sfp switch I have selected WS-C3750X-12S-S
for my requrement is here my doubt is..
Is I have need to add seperate SFP trancievers for this switch or not ?
data sheet I didnt find that switch come alongwith 12 trancievers so how should I configure this procudt
Solved! Go to Solution.
03-17-2013 06:06 AM
Hi,
The Catalyst 3750X-12S switch is an SFP based switch so you do need SFP transceivers. Take a look at Table 6 in the Cisco Gigabit Ethernet Transceiver Modules Compatibility Matrix for details of the supported transceivers and the OS release they're supported from.
Regards
03-17-2013 06:06 AM
Hi,
The Catalyst 3750X-12S switch is an SFP based switch so you do need SFP transceivers. Take a look at Table 6 in the Cisco Gigabit Ethernet Transceiver Modules Compatibility Matrix for details of the supported transceivers and the OS release they're supported from.
Regards
03-23-2013 08:48 PM
Hi
If out of budget then you can use TLC connectors where you can use UTP instead of sfp and foc
Sent from Cisco Technical Support Android App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide