Command to see the Power Supply Details

[balajitvk]

Hi,

is there any command to check the powersupply details on WS-C2950G-24-EI Switch.

i tried show env all but it is showing only the status.

But my requirment is to find the type of power supply provided to that switch like, Whether AC/DC Powersupply and voltage levels and current details.

Thx in Advance,

Balaji.V

[spremkumar]

Hi

AFAIK i dont think u can check out the type and all using show command in 2950 ..

Show env all even shows out the following which is informative about the operation of the acessories and not much indepth view on them..

FAN is OK

Internal POWER supply is FAULTY

RPS is present

RPS is supplying power

regds

[Benjamin Shohet Network Eng]

show env all

More specifically - show env power

There is Power Supply states and Watts info,

For more info you can copy the PID of each Power Supply and search for it in the web.

[rceliberti@hammer.net]

sh env power only shows the first switch's power supply's.  Must use "all".

[sudheerkumar3349]

sh power status all