Concentrating DSL on Cisco 3600??

[velimirmkd]

Hi,

I read that 3600 is usually used for let's say larger branch office do access the central office via 6000 concentrator for example, but my question is: is it possible to make the 3600 act as a DSL concentrator, meaning is there way to accept several DSL connections to 3600

Thanks

[tepatel]

YES..You are right. you can use the 3600 with ATM T1/E1/T3 network modules to terminate the dsl connections..Basically you can use it as dsl aggregator.

Here is the place who discuss that.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t5/atm_ima.htm

http://lbj/push_targets1/ucdit/cc/td/doc/product/access/acs_mod/cis3600/3600_cn/bearcat.htm

[velimirmkd]

Thanks you for response, that really helps. But here is the whole situation. The county where I work for an ISP has no ATM network at all. Meaning our telco does not offer ATM services at all. Since I'm new to DSL technology, I need some more info on wether it can be done (using 3600 as DSL concentrator) without the need from the telco offering ATM. I hope you understand my question and if not I will be glad to explain in more detail.

Thanks

Velimir