11-22-2004 08:28 AM - edited 03-02-2019 08:07 PM
I am having problems connecting my 3750 to our companies 4006. The 4006 can see that there is traffic on the two assigned ports, but is not able to ping the 3750.
I've attached the 3750 config settings.
Thanks,
11-22-2004 09:07 AM
Can you also post the config from 4000 as well and sh cdp neigh from both switches.
11-23-2004 03:31 AM
I will post the config for the 4000 as soon as I obtain it from the system admin.
Thanks
11-29-2004 06:09 AM
11-29-2004 06:15 AM
What are the port numbers on 4006 which connect to the 3750?
11-29-2004 08:31 AM
Ports 6/11-12
11-29-2004 08:33 AM
Ports 6/11-12
11-29-2004 09:46 AM
From the config of your CAT4000
set interface sc0 5 10.4.231.2/255.255.240.0 10.4.239.255
From 3750
interface Vlan1
ip address 10.4.229.247 255.255.240.0
!
interface Vlan5
no ip address
Which VLAN do you want to be the management? It is VLAN5 on the 4006 and VLAN1 on 3750 but subnet is the same. Keep the same VLAN on both switches and you should be able to ping between the two
Hope this helps
11-29-2004 09:18 AM
Does trunking and etherchannel look correct on both sides ? Just from a quick look it looks like they are set up ok . Can you see cdp on this link ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide