Console timeout command on CatOS?

[andy.cruz]

The command 'set logout <time>' for the CatOS (please see the link below) did not clearly mention if this command also applies for the console port. Can anybody confirm if this command applies to both console and telnet idle sessions?

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_6_3/cmd_ref/set_m_pi.htm#35928

Thanks in advance.

[raymong]

As far as I know, the set logout command is used for the console connection. I am not aware of an exec timeout command for telnet sessions for the CAT OS.

[andy.cruz]

Please see the description under the 'Accessing the Switch CLI' from the following link:

http://www.cisco.com/en/US/products/hw/switches/ps700/products_configuration_guide_chapter09186a00800ea9f8.html#xtocid3

Thanks.