02-25-2004 10:54 AM - edited 03-02-2019 01:50 PM
I'm preparing to convert two pair of 6506s from native IOS version 12.1(8a)E5 with redundant L2 and static routes to hybrid code.
Is there converting tool available for this? I need best practice recommendations to minimize problems as these are the CORE switches. Thank you in advance for your assistance.
02-25-2004 12:41 PM
Ok. Do you mind if I ask as to what is driving this? There may be some functionality differences at this time but it seems that Cisco is moving to a common interface... IOS. Correct me if I am wrong. I have heard of the conversion from Native to Hybrid. An instructor who was a huge fan of Hybrid mode put out the change info to me in hardcopy. You may be able to contact him at Jchapman@skylinecomputer.com. Good luck.
02-25-2004 12:48 PM
Thanks for the information. As to the reason behind this has to do with L8 and above of the OSI... politics of the company. Something that you and I do NOT care to be involved with!!! But I will try your instructor to see if he could help. Thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide