09-27-2002 08:37 AM - edited 03-02-2019 01:42 AM
Can anyone tell me if it is possible to copy files to a TFTP server using SNMP on the 2924-XL Cat switches, I have run into a wall searching on cisco.com. I know that it is possible for devices running 12.0 using the CISCO-CONFIG-COPY-MIB but in every document related to copying the configs to tftp using SNMP it is mentioned that it is not applicable to the 2900/3500-XL series switches.
If it isn't possible with SNMP what other possiblities are there?
Thanks,
Niels
09-27-2002 11:00 AM
There are a few tech tips at: http://www.cisco.com/warp/public/477/SNMP/index.html which uses the old deprecated mibs. See if that helps. XL switches do not support the CONFIG-COPY MIB currently.
09-30-2002 04:51 AM
Hi Niels,
With the command "copy
regards,
Alexander
10-08-2002 02:48 AM
Thanks Alexander,
The thing is you can do this with SNMP on the 7500 and automate it without having to do it manually. But I haven't been able to find any info on how to do this via SNMP on the 2900-XL series switches. We've solved this with a script using the expect programming tool, thus not using SNMP. With this we are executing each comando as you would do manually typing every command.
Cheers,
Niels
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide