05-07-2002 01:41 AM - edited 03-01-2019 09:37 PM
Hi,
I have an E3 link b/w 2 sites. The E3 link is set up at both ends using a PA-E3 with a Cisco 7206VXR router. The PA-E3 module has an integrated DSU. According to the ISP, the E3 line is not terminated remotely with a DSU. In that case, should i use G751 framing for the line? Btw, the E3 link is unchannelized.
05-13-2002 10:14 AM
Often times complex troubleshooting issues are best addressed in an interactive session with one of our trained technical assistance engineers. While other forum users may be able to help, its often difficult to do so for this type of issue.
To utilize the resources at our Technical Assistance Center, please visit http://www.cisco.com/tac and to open a case with one of our TAC engineers, visit http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.
05-23-2002 02:53 AM
Have a look at the E3 troubleshooting page :
http://www.cisco.com/warp/customer/116/e3_ts_flchart_22880.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide