cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2319
Views
0
Helpful
3
Replies

How to configure Port forwarding in Cisco catalyst 2950 switch

thiyaguarc
Level 1
Level 1

Hi guys!

Could you please send me any link about how to configure port forwarding in Cisco catalyst 2950 switch or cisco 2600 Router.

Thanks in advance!

3 Replies 3

Prashanth Krishnappa
Cisco Employee
Cisco Employee

What do you mean when you say "port forwarding"? Can you elaborate?

thiyaguarc
Level 1
Level 1

In our office we are using PCAnywhere. Pcanywhere will work only with the static IPs. Consider that I am configuring my Cisco 2950 Switch as DHCP. And the default port used by pcanywhere is 5631(tcp) and 5632(udp). I will configure anyother free ports(5633 & 5634...) for other machines for pcanywhere.

I can configure the switch to forward the request which comes to the port 5631 and 5632 to a particular machine. and like that 5633 and 5634 to forward to another machine.

Hope you can understand. This option is available in Linksys wireless-G Broadband routers.

Like that can we configure it in the Cisco 2950 switch or Cisco 2600 router.

Thanks in advance!

thiyaguarc
Level 1
Level 1

In our office we are using PCAnywhere. Pcanywhere will work only with the static IPs. Consider that I am configuring my Cisco 2950 Switch as DHCP. And the default port used by pcanywhere is 5631(tcp) and 5632(udp). I will configure anyother free ports(5633 & 5634...) for other machines for pcanywhere.

I can configure the switch to forward the request which comes to the port 5631 and 5632 to a particular machine. and like that 5633 and 5634 to forward to another machine.

Hope you can understand. This option is available in Linksys wireless-G Broadband routers.

Like that can we configure it in the Cisco 2950 switch or Cisco 2600 router.

Thanks in advance!