IOS Upgrade for 4006

[admin_2]

Guys,

I have been on the software selection tool that cisco offers but have not been able to find the software I need. Basically I have a 10/100 eth module that isn't being detected at the moment, and the error message suggests that i need an OS upgrade. Config details follow:

-Supervisor II engine, WS-X4013

-Eth 10/100 module, WS-X4148-Rj45V

Version info:

WS-C4006 Software, Version NmpSW: 5.4(2)

Copyright (c) 1995-2000 by Cisco Systems, Inc.

NMP S/W compiled on Apr 7 2000, 17:05:03

GSP S/W compiled on Apr 07 2000, 15:17:58

System Bootstrap Version: 5.4(1)

Hardware Version: 1.3 Model: WS-C4006 Serial #: JAB05040D4J

Mod Port Model Serial # Versions

--- ---- ---------- -------------------- ---------------------------------

1 2 WS-X4013 JAB05040D4J Hw : 1.3

Gsp: 5.4(2.0)

Nmp: 5.4(2)

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 65536K 29446K 36090K 16384K 4468K 11916K 480K 149K 331K

Uptime is 0 day, 0 hour, 33 minutes

*************************************************

Can anyone suggest what I need to get this eth module online and get up-to-date please? I have a BCMSN exam coming up soon, so I'd like to toy around w a practice domain I had all but setup. Thanks very much for any feedback!

[mike-greene]

Hi,

This link should give you what you need...looks like you need 6.1(1) or later.

http://cisco.com/en/US/customer/products/hw/switches/ps663/prod_release_note09186a008007f07f.html#wp53750

Good luck on your exam!

[#3]

Mike -

Thanks for that link but Im getting a page cannot be displayed message. Another quick question, does 6.1(1) need to be purchased or can you d/l it from cisco? Thanks for the advice

-Dave

[mike-greene]

Dave,

The page requires a CCO login to view. Lets try it again...

http://cisco.com/en/US/customer/products/hw/switches/ps663/prod_release_note09186a008007f07f.html#wp53750

If you are unable to access the page, here is what it says....

WS-X4148-RJ45V 48-port inline power 10/100BASE-TX switching module

Minimum Supervisor Engine Software Version 6.1(1)

Recommended Supervisor Engine Software Version 7.4(3)

I believe if you have a Smartnet on the 4006 you can download it for free. If you don't, then it's probably going to cost.

Mike

[Prashanth Krishnappa]

The release notes are at

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/relnotes/ol_1983.htm

[#6]

Thanks a lot guys.. doubt this box has that smart feature, I'll look at prices.