Memory upgrade for WS-SUP720

[richard.werner]

Hi all,

is there a memory upgrade available for this SUP720

from the 512MB to 1Gig, for the Switch and route

processor.

Thanks

Richard

[dan.gregoire · Accepted solution]

Here's a link that may help.

http://www.cisco.com/en/US/products/hw/switches/ps708/products_release_and_installation_notes09186a008017ef3e.html

[richard.werner]

Thanks for you reply, it helped me, because with your

link and with the help of the GPL Priselist I found

out, that it can`t be done, because the memory

MEM-MSFC2-1GB= is not available.

It seems to me the only way is to get a WS-SUP720-

3B=

and the WS-F6K-PFC3BXL= kit (the correct kit WS-F6K- PFC3B)is also not obtainably? and those kit`s would

contain the following.

One Catalyst 6500 series PFC3B or PFC3BXL

One packet of labels

One disposable grounding wrist strap

One bag of mounting screws

Two 1-GB DRAM DIMMs (to be installed on the

Supervisor Engine 720 switch processor and route

processor) PFC3BXL only.

Regards

Richard