01-17-2002 08:34 AM - edited 03-01-2019 08:06 PM
Hello,
We were recently aquired and will very soon need to migrate from EIGRP to OSPF. I have heard that you can run both (If configured properly), but as our infrastructure is relatively small, it makes more sense just to use OSPF alone. Are there any special considerations or potential problems that we should be aware of?
01-17-2002 10:00 AM
Since you will probably end up with some redistribution going on pay careful attention to how it gets set up.
Is your EIGRP AS divisible into descrete areas for OSPF ?
NO doubt there is more..
01-18-2002 09:50 AM
Would their be a problem with simly disabling EIGRP and then adding OSPF? All our routing is now done on our Cat 6009 and we no longer have any other routers on our network.
01-19-2002 01:41 AM
so long, you bring up all the networks of EIGRP get connected throu ospf ,i hope it wont be a problem.And as per your info, as your network is small you could do this.So goin for ospf alone cant be a problem
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide