NM-1Fe card not recognised in 3620

[brian_bosveld]

We are getting a message:

MEMINIT: No iomem table entry for pa type 0xD7 in slot 1

When we boot with the card installed and do not see the interface at the console prompt.

Are we missing something.

Thanks for any help.

[edangel]

Please check your IOS version, I believe that the 12.1 & above should work and 12.2 version positively works since that is what is used in mine. Also may check what is amount of dram & flash. This message appears to be coming upon initial bootup, I once had to switch card slots on 2 cards(3620) just to make router bootup correctly. HTH Edward