My 7204 LNS shares a L2 Vlan (vl40) with my pix's dmz2 intf.
PPPoE/l2tp clients connect via LAC router to 7204 LNS.
Clients are on the same IP subnet than pix dmz2.
So traffic from clients has not to be routed but only bridged.
Is it possible :
- pix dmz2 be the default router for clients.
Dhcp returns the good value (pix dmz2 IP) but client always gets its own address as default gateway.
- not to have an ip add on 7204 for L2 vlan subintf (F0/0.40)
I tried unsuccessfully to create a bridge between :
- L2TP virtual-template
- 7204 sub intf
If I don't give an IP add to 7204 L2 vlan sub intf, traffic doesn't go through
Any help appreciated
