08-06-2002 07:42 AM - edited 03-02-2019 12:28 AM
I am using the following config on my 3600 series router to provision DSL customers. Is the protocol PPoE or PPoA?
atm pvc 33 1 33 aal5ciscoppp Virtual-Template1
interface Virtual-Template1
ip unnumbered FastEthernet3/0
ip mroute-cache
peer default ip address pool test
ppp authentication pap
Thanks,
Mitchel
08-06-2002 10:40 AM
Hi Mitchel -
This is PPPoA. and is using the old style configuration.
There is more info here that may be helpful:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan_c/wcfppp.htm
Regards,
Clay
08-06-2002 10:57 AM
Thanks Clay. I will check out the document.
Mitchel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide