Problems with DHCP and DSL Modem

[jrgabba]

I have a 3600 router with two ethernet interfaces. I have an aDSL modem connected to e0/0 on the 3600. I need to configure DHCP for e0/0 to obtain an IP via my service provider through the aDSL Modem. What command can I use to do this. It is my understanding that "ip address negotiated" only works on WAN interfaces, not ethernet interfaces. Please help...

[makchitale]

"ip address dhcp" under the ethernet inteface should work...need to be at 12.1(2)T or above.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipras_r/1rfdhcp.htm#1049291

Thanks, Mak.

[jrgabba]

Thanks for the post Mark.......